Free tier

← All guides · EN 16931 & validation

Reverse charge VAT on e-invoices: category AE, 0%, and the identifier rule

By the Ingenious AI team · Published 14 November 2026 · Reviewed 14 November 2026

Convert an invoice free

Put this guide into practice now: convert one invoice free — validated UBL 2.1 XML plus a Factur-X PDF, with the acceptance checker for your client’s country. See pricing for bulk conversion, country rule packs and monitored clients.

Short answer

Reverse charge means the supplier charges no VAT and the buyer accounts for it in their own VAT position. On an e-invoice, reverse-charge lines carry VAT category AE with a rate of exactly 0% — and when the supply crosses a border, validation requires the buyer's VAT identifier on the invoice (the reverse-charge rule), plus the seller's VAT identifier as for any cross-border B2B invoice. It is the standard treatment for cross-border B2B services in the EU.

What is reverse charge?

Reverse charge is a VAT mechanism where the buyer, not the seller, accounts for the VAT on a supply. In EN 16931 terms its lines use VAT category AE. This product's validator enforces the pairing: AE lines must carry a 0 rate (the zero-family rule), and 'Reverse charge (AE) across borders requires the buyer's VAT identifier (BT-48)' — rule BR-AE-02 — while cross-border B2B invoices generally require the seller's VAT identifier (BR-CO-26).

Why reverse charge exists

Without reverse charge, a supplier selling services across the EU would register for VAT in every client's country, charge that country's VAT, and file there — a compliance burden that would fence small firms inside their home market. Reverse charge cuts the knot: the supplier invoices without VAT, and the buyer — already registered in their own country — self-accounts for the tax. Cross-border B2B trade becomes as simple to bill as domestic trade, with the tax collected where the buyer is established.

The mechanism's price is evidence. The buyer's self-accounting stands on them being a taxable business in another country, and the invoice is where that status is demonstrated: hence the identifier rules. The buyer's VAT identifier on your invoice is not bureaucracy — it is the load-bearing fact of the whole arrangement, the thing that makes 'no VAT charged' correct rather than an omission.

Expressing reverse charge on the invoice

Each reverse-charge line carries category AE and a rate of exactly 0. The tax breakdown then shows an AE group: the taxable amount (your line total for those lines) with tax of 0. The payable amount equals the net amount — there is no VAT to add. Mixing AE lines with standard-rated lines on one invoice is legitimate: the breakdown keeps the groups separate, each taxed by its own rule.

The category choice is where errors breed. AE is not 'any line without VAT': exempt supplies are E, zero-rated supplies are Z, exports G, intra-EU goods K, out-of-scope O. Choosing AE for a line that is merely exempt misstates the buyer's obligations — their system books a reverse charge that never happened. Choose the category that names the actual treatment; the validator checks consistency, but only you know the substance.

The identifier rules, precisely

Two rules guard the arrangement. BR-AE-02: where seller and buyer countries differ and any line uses category AE, the buyer's VAT identifier is required. BR-CO-26: cross-border B2B invoices require the seller's VAT identifier generally. Validation compares the party countries on the invoice, sees the AE category, and demands the pair of identifiers before any file is generated.

Operational consequence: identifiers are onboarding data. Collect the client's VAT identifier when the engagement is agreed, verify you have recorded it exactly, and keep your own identifier in your seller template permanently. An invoice blocked at conversion for a missing identifier is the system working — the same invoice sent as a PDF would have sailed out defective and been queried or rejected by the buyer's system weeks later, with the payment clock running backwards.

When reverse charge applies — and when it does not

The classic case in this product's world is cross-border B2B services: a consultant in one EU country billing a business client in another. The worked examples across these guides use it repeatedly — design, translation, training, support — because it is the everyday shape of freelance and agency trade inside the single market. Domestic reverse charge also exists in specific sectors in some countries, which is a matter for your accountant's knowledge of your own jurisdiction.

It does not apply to B2C sales (consumers cannot self-account), nor where the buyer cannot demonstrate business status — the missing-identifier case again. If a client cannot supply a VAT identifier, the reverse-charge basis is unproven and the treatment must be revisited rather than forced. The validator's refusal is the early, cheap version of that conversation; the expensive version happens in a tax audit.

Reverse charge through the mandate era

Structured invoicing raises reverse charge's stakes in a healthy direction. Under PDF habits, a missing identifier or a wrong category could drift for years, forgiven by human processors. In the structured era, the client's intake checks the AE-evidence mechanically on every invoice — Belgium's Peppol flow, France's platforms, Germany's systems all read the category and look for the identifier as data. The treatment that was loosely documented becomes precisely verified.

That precision rewards the suppliers who systematise it: AE as the deliberate category for cross-border B2B services, identifiers in the client record, validation before sending. Their reverse-charge invoices become the most routine documents they issue — no tax to compute, one evidence check to pass — while competitors discover, rejection by rejection, that the casual era ended.

Reverse charge invoicing in 5 steps

  1. Confirm the substance: a B2B supply where the buyer accounts for VAT — typically cross-border services within the EU.
  2. Collect the buyer's VAT identifier at engagement time and record it exactly; keep yours in your seller template.
  3. Set the lines to category AE with a rate of exactly 0 — never S at 0%, never a negative or blended treatment.
  4. Convert and confirm validation passes the identifier rules (BR-AE-02, BR-CO-26) and the AE tax group shows tax of 0.
  5. Send the structured pair; the buyer's system books the reverse charge from the category and identifiers as data.

Worked example: the identifier that makes EUR 0.00 correct

A translator invoices a French publisher EUR 1,080.00 for a manuscript translation: one line, category AE, rate 0%. First conversion attempt fails: the buyer's VAT identifier field is empty, and BR-AE-02 names the problem — reverse charge across borders requires it. The identifier is added from the publisher's purchase order, exactly as printed there.

Second attempt passes: tax breakdown shows the AE group with taxable EUR 1,080.00 and tax EUR 0.00; payable EUR 1,080.00. That EUR 0.00 is now a proven figure — it follows from a category, an identifier and a rule — rather than an absence anyone must take on trust. The publisher's system self-accounts on receipt, which is the mechanism completing itself.

Frequently asked questions

What rate goes with category AE?

Exactly 0%. The zero-family rule rejects AE lines carrying any other rate, and BR-S-08 rejects the common mistake of coding a reverse-charge line as S at 0%.

Why is the buyer's VAT identifier mandatory for AE?

It is the evidence that the buyer is a business who will self-account for the VAT — the factual basis of reverse charge. Across borders, validation requires it (BR-AE-02), and the seller's identifier too (BR-CO-26).

Is reverse charge the same as exempt (E) or zero-rated (Z)?

No — all three show 0% tax but book differently. AE means the buyer accounts for the VAT; E means the supply is exempt; Z means it is taxable at a zero rate. The category must name the real treatment.

Can one invoice mix AE and S lines?

Yes — each treatment on its own lines. The tax breakdown groups them separately: the AE group at tax 0, the S group at its rate.

What if my client has no VAT identifier?

Then the reverse-charge basis is unproven — revisit the treatment with your accountant rather than forcing AE. Validation will refuse the cross-border AE invoice without the identifier, by design.

Keep going

Run the free tool this guide is about: convert an invoice · acceptance checker · pricing · about EInvoice Translator · all guides

Related guides

← Back