← All guides · EN 16931 & validation
VAT categories K, G and O: intra-EU goods, exports and outside-scope lines
By the Ingenious AI team · Published 14 November 2026 · Reviewed 14 November 2026
Convert an invoice free
Put this guide into practice now: convert one invoice free — validated UBL 2.1 XML plus a Factur-X PDF, with the acceptance checker for your client’s country. See pricing for bulk conversion, country rule packs and monitored clients.
Short answer
Three categories cover the edges of the VAT map: K marks intra-EU supplies (goods to a business customer in another member state), G marks exports outside the EU, and O marks supplies outside the scope of VAT altogether. All three sit in this validator's accepted category list (S, Z, E, AE, K, G, O, L, M), and in the tax computation the categories E, AE, O and Z contribute no tax — the category declares why, and the breakdown shows it.
What are categories K, G and O?
They are VAT category codes for invoice lines (BT-151). In these guides' usage: K for intra-EU supplies, G for exports, O for supplies outside the scope of VAT. The engine groups the tax breakdown by category and rate and computes tax as taxable × rate except for the categories E, AE, O and Z, which are assigned zero tax by construction. Category choice is a tax-treatment decision; the validator enforces its consistent expression.
K: intra-EU supplies
K is the category for supplies within the single market that follow the destination principle — classically, goods sold to a business customer established in another member state, where the supply leaves the seller's VAT account and the buyer accounts in their country. It is the goods-side cousin of the services reverse-charge pattern: the invoice shows the supply, the category names its cross-border treatment, and the identifiers of both parties carry the evidence.
Lines under K belong on their own lines, like every treatment: a shipment of goods to a German business and a domestic service call are different supplies with different categories, and blending them into one line destroys both bookings. The identifiers discipline applies with full force — cross-border documents live and die by the seller's and, where reverse charge applies, the buyer's identifier being present and exact.
G: exports beyond the EU
G marks exports — supplies leaving the EU's VAT territory for customers outside it. The export line tells the seller's and any reviewing system that this supply is documented as an export, with the evidence expectations exports carry in the seller's own records (proof of exit and delivery belong to the export file, of which the invoice is one component). On the invoice itself, G lines sit in the breakdown like any category: taxable amount stated, tax per the category's treatment.
Suppliers adding export trade to an EU book should note the workflow change, not just the code: new evidence habits, new client-record fields — the buyer's country now sits outside the mandate table's twelve, so the acceptance checker will honestly return 'unknown' for their mandate position, because exports are governed by customs and the destination's rules, not by EU e-invoicing phases — and the same invoice discipline underneath.
O: outside the scope
O is for supplies that are not merely untaxed but outside VAT's scope altogether — the transaction is not a taxable supply in the first place. The distinction from E (exempt) and Z (zero-rated) matters to both parties' VAT reporting: three different reasons for no tax appearing, three different codes, and the receiving system books them differently. On the invoice, an O line contributes its amount to the document with tax of zero by construction, declared by the category.
Outside-scope claims deserve the accountant's eye more than most: the boundary between 'exempt', 'zero-rated' and 'outside scope' is a legal classification of the supply, and miscoding shifts figures between boxes of both parties' VAT returns. The validator will faithfully process whichever category you choose — which is precisely why the choice should be a recorded decision, not a form-filling reflex.
L and M: the rest of the accepted list
The validator's accepted set completes with L and M — categories retained in the EN 16931 code list for specific national and sectoral cases. Most suppliers in this product's audience will never code a line L or M; their presence in the list matters for a different reason: validation accepts the full code family the standard defines, so a legitimately-coded document from a sector that uses them is not rejected for exoticism.
The working rule for rare categories is the same as for rare conditions anywhere: do not self-diagnose. If a supply seems to belong outside S, Z, E, AE, K, G and O, the classification question goes to your accountant with the supply's facts — and the answer returns as a template rule, applied consistently thereafter. Category codes are few, stable and consequential; treat the list as a short menu from which an adviser helps you order once.
Categories in the breakdown: the map made visible
However many categories an invoice uses, the tax breakdown renders them as a small map of the invoice's tax geography: one subtotal per category-rate pair, taxable amounts summed per group, tax computed per the group's rule. Read the breakdown before sending any multi-category invoice — it is the fastest audit of your own coding decisions, because a miscoded line stands out as a group that should not exist or a group whose size is wrong.
That readability is the structured model's gift to careful suppliers: in the PDF era, an invoice's tax geography was implicit in prose and hope. Now it is a table, computed from your lines, identical in your system and your client's. Categories K, G and O extend that table to the map's edges — intra-EU, export, outside scope — so even the unusual invoice declares, in code, exactly what it thinks it is.
Using K, G and O correctly in 5 steps
- Classify the supply first, with your accountant: intra-EU goods (K), export (G), outside scope (O) — the code follows the classification.
- Give each edge-treatment its own lines; never blend K/G/O supplies into S or AE lines.
- Keep identifier discipline at full strength on cross-border documents — the categories' evidence depends on them.
- For exports, keep the export evidence file alongside the invoice; the invoice is one component of it.
- Read the tax breakdown before sending: one subtotal per category, each the size you expect.
Worked example: one invoice, three territories
An equipment firm invoices a single order split by destination: machinery shipped to a French business customer (intra-EU supply, category K, EUR 9,000.00), a second unit exported to a customer outside the EU (category G, EUR 9,000.00), and installation at the seller's domestic site under standard treatment (category S, EUR 1,500.00 at 20%, tax EUR 300.00). Three lines, three categories, one invoice.
The breakdown renders the geography exactly: K subtotal EUR 9,000.00, G subtotal EUR 9,000.00, S subtotal EUR 1,500.00 with EUR 300.00 tax; payable EUR 19,800.00. Each party's system books each territory by its own rule — and the export file, the identifiers and the accountant's classification note sit behind the codes, where classifications belong: decided once, expressed in data, visible to everyone.
Frequently asked questions
What is the difference between K and AE?
Both appear in cross-border trade: AE is reverse charge (the buyer accounts for VAT), classically for services; K marks intra-EU supplies, classically goods to a business in another member state. Your accountant classifies the supply; the code follows.
Is an export line the same as Z (zero-rated)?
No — the export's treatment is declared by category G. Substituting Z tells a different story to both VAT administrations, even where no tax is charged.
When is a supply 'outside the scope' (O)?
When it is not a taxable supply at all — a legal classification, not a default for 'no VAT charged'. Take the classification from your accountant; miscoding between E, Z and O distorts both parties' VAT reporting.
What are L and M for?
They complete the accepted code list for specific national and sectoral cases. Most suppliers never use them; if a supply seems to need one, that is an adviser question, answered once and templated.
How does the engine tax K and G lines?
The breakdown groups by category and rate and computes tax per group; the categories assigned zero tax by construction are E, AE, O and Z. K and G lines therefore follow the rate they carry — set category and rate as the classified treatment requires, and validate.
Keep going
Run the free tool this guide is about: convert an invoice · acceptance checker · pricing · about EInvoice Translator · all guides
Related guides
- VAT categories explained: S, Z, E, AE, K, G and O on an e-invoice line
- Reverse charge VAT on e-invoices: category AE, 0%, and the identifier rule
- Cross-border invoices: when seller and buyer VAT identifiers are required
- E-invoicing and your accountant: who decides what, and what to hand over
- Invoice totals and the BR-CO rules: how e-invoice arithmetic must reconcile